6-8 INCH LIFT KIT | FRONT AND REAR TRAIL PERFORMANCE STRUTS/SHOCKS - 150210TPS

Fits: 2019-2025 GM SILVERADO/SIERRA 1500 2WD/4WD

• Maximum Tire Diamater - 35"
• Recommended Wheel Backspacing - 5"
• Front Lift Height: 6.0"- 8.0"
• Rear Lift Height: 4.0"

Take on new roads and challenging terrain with Belltech's Trail Performance lift suspension for the 2019-2025 GM Silverado / Sierra 1500 2WD/4WD trucks. Precision engineered in the USA and made with the highest quality components that not only look good but perform at the highest level.

At the front, we supply our patented 6” to 8” height adjustable Trail Performance struts. We add an adjustable packer design with a progressive rate polymer, open-cell, bump stop for ideal bump stop engagement. Belltech struts are designed to use the OEM coil springs and top mounts for simplified installation.

Included are Belltech lift spindles that are purposely engineered to reduce weight while improving durability. Unlike other lift kits, with Belltech there is no sacrifice in turn radius as we engineered and strived to retain factory turning radius. We also include a 1-3/8” diameter cold-formed solid steel front sway bar with three settings for added lateral control. A 1/4" thick laser-cut skid plate helps to protect the driveline and steering components when tackling off-road terrain.

To lift the rear, include two heavy-duty 1/4” steel 4” lift blocks with extended U-bolts. We feature two vehicle-specific, precisely tuned, preset Trail Performance shocks with large 55mm damper bodies that hold an increased volume of oil to keep it cool and produce ideal damping with consistent results. Our shock methodology is known to produce an exceedingly smooth ride, reducing the harshness of flawed roads or challenging trails. Belltech lift kits undergo rigorous testing in the most extreme circumstances to deliver the best high-performance suspension option you can find.

• Front height-adjustable Trail Performance struts and rear Trail Performance shocks
• Powder coated high strength ductile iron lift spindles retain factory ride quality
• 1/4” steel brackets and high clearance crossmembers
• One-piece differential drop down bracket
• Heavy Duty Grade 10 Hardware
• Retained factory alignment specifications with factory cams
• Retained OEM front differential geometry
• Retains OEM CV angles
• Retains factory track width
• Limited-Lifetime warranty

 IMPORTANT NOTES:

• This Belltech Lift Kit does NOT fit Models with ARC, Magnetic Ride Shocks, Autoride, or AT4.
• This Belltech Lift Kit will NOT add the stated additional lift to Chevrolet Trail Boss / GMC Elevation Models with the 2" Factory Lift.
• This GM 1500 Kit is NOT compatible with mono-leaf suspension. 
• Excludes Diesel Engine. 

Installation Instructions

• Installation Instructions 1
• Installation Instructions 2